Referencias Recubrimientos

Recuerda citar: J. Gómez-García. Tesis: “Análisis de la degradación de recubrimientos de barrera térmica mediante espectroscopía de impedancia electroquímica”. Universidad Rey Juan Carlos. Julio 2009

Referencias

[1]   T. Soumail “Coatins for tubine blades”, (university of Cambridge), accessible el 8 Feb. 2005: www.msm.cam.ac.uk/phase-trans/2003/Superalloys/coatings/index.html.

[2]   P. Scardi, M. Leoni, L. Bertini, L. Bertamini, “Residual stress in partially-stabilized-zirconia TBCs: experimental measurement and modelling”, Surf. Coat. Technol. 94-95 (1997) 82-88.

[3]   M.J. Pomeroy, “Coatings for gas turbine materials and long term stability issues”, Mater. & Design [26 (3)] (2005) 223-231

[4]   N. P. Padture, M. Gell, E.H. Jordan, “Thermal barrier coatings for gas-turbine engine applications”, Science 296 (2006) 280-284

[5]   G. W. Goward, “Progress in coatings for gas turbine airfoils”, Surf. Coat. Technol. [108 (1-3)] (1998) 73-79

[6]   Kh.G. Schmitt-Thomas, M. Hertter, “Improve oxidation resistance of thermal barrier coatings”, Surf. Coat. Technol. 120 (1999) 84–88

[7]   B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Prussner, K.B. Alexander, “Substrate and bond compositions: factors affecting alumina scale adhesion“, Mater. Sci. Eng. A 245 (1998) 201-211

[8]   H. Lau, C. Leyens, U. Schulz, C. Friedrich, “Influence of bondcoat pre-treatment and surface topology on the lifetime of EB-PVD TBCs”, Surf. Coat. Technol. 165 (2003) 217–223

[9]   H.G. Scott, “Phase relationships in the zirconia-yttria system”, J. Mat. Sci., 10 (1975) 1527-1535

[10]           M. Ruhle, N. Clausen, A.H. Heuer, “Microstructural studies of Y2O3 containing tetragonal ZrO2 polycristals (Y-TZP)”, in Advances in Ceramics, Vol. 12, Science and Technology of Zirconia II, eds. N. Clausen, M. Ruhle, A.H. Heuer, Am. Ceram. Soc., Colombus, OH, USA, (1984) 352-370

[11]           V. Lanterni, A.H. Heuer, T.E. Mitchell, “Tetragonal phase in the system ZrO2-Y2O3”, in Advances in Ceramics, Vol. 12, Science and Technology of Zirconia II, eds. N. Clausen, M. Ruhle, A.H. Heuer, Am. Ceram. Soc., Colombus, OH, (1984) 118-130

[12]           K. Tsukuma, K. Uede, K. Matsushita and M. Shimada, High-temperature Strength and Fracture Toughness of Y2O3-Partially Stabilized ZrO2/Al2O3 Composites”, J. Am. Ceram. Soc. [68(2)] (1985) 56-58

[13]           F. Meschke, O. Raddatz, A. Kolleck, Gerold A. Schneider, “R-curve behavior and crack-closure stresses in barium titanate and (Mg,Y)-PSZ ceramics”, J. Am. Ceram. Soc. [83 (2)] (2000) 353-361

[14]           E.C. Sabbarao, “Zirconia- an overview. In:” Heuer A.H., Hobbs L.W., editors, Advances in ceramics, Science and Technology of Zirconia, vol. 3 (1981) 1-24

[15]           Y.J. Lin, PP. Angelini, M.L. Mecartney, “Microstructural and chemical influences of silicate grain-boundary phases in yttria-stabilized zirconia”, J. Am. Ceram. Soc. 73 (1990) 2728-2735

[16]           M. Ruhle, N. Claussen, A.H. Heuer, “in Advances in ceramics: science and Technology of Zirconia II,” 12 (1984)

[17]           A. H. Heuer. R. Chaim and V. Lanteri, “Review: Phase transformations and microstructural characterization of alloys in the system Y2O3-ZrO2”, Advances in Ceramics, 24: Science and technology of Zirconia III, (1988)

[18]           R.A. Miller, J.-L. Smialek, R.G. Garlick, “Phase stability in plasma-sprayed partially stabilized zirconia-yttria”, Advances in Ceramics, Vol. 3, Science and Technology of Zirconia, eds. A.H. Heuer, L.W. Hobbs, Am. Ceram. Soc., Colombus, OH, (1982) 241-253

[19]           S. Jonas, F. Nadachowski, D. Szwagierczak, “A new non-silicate refractory of low thermal expansion”, Ceram. Int. 24 (1998) 211-216

[20]           C. Cano, M.I. Osendi, M. Belmonte, P. Miranzo, “Effect of the type of flame on the microstructure of CaZrO3 combustion flame sprayed coatings”, Surf. Coat Technol. 201 (2006) 3307–3313

[21]           I. Taymaz, K. Çakir, A. Mimaroglu, “Experimental study of effective efficiency in a ceramic coated diesel engine”, Surf. Coat. Technol. 200 (2006) 1182-1185

[22]           I. Taymaz, “The effect of thermal barrier coatings on diesel engine performance”, Surf. Coat. Technol. [201(9-11)] (2007) 5249-5252

[23]           J. Gómez-García, P. Poza, V. Utrilla, “Crecimiento y caracterización de recubrimientos cerámicos con aplicaciones como barreras térmicas”, Bol. Soc. Esp. Ceram. V.  45 (2006) 70-74

[24]           A. Sálazar, J. Gómez-García, P. Poza, V. Utrilla, “Microstructural evolution of thermal barrier coatings during isothermal oxidation”, Key Eng. Mater. 333 (2007) 269-272

[25]           A. Sálazar, J. Gómez-García, P. Poza, V. Utrilla, “Degradación de recubrimientos ZrO2-CaO/NiAlMo por oxidación isoterma”, Bol. Soc. Esp. Ceram. V. 45 (2006) 389-395

[26]           D.N. Assanis, “Effect of combustion-chamber insulation on the performance of a low heat rejection diesel-engine with exhaust heat-recovery”, Heat Rec. Syst. Chp. [9 (5)] (1989) 475-484

[27]           T.M. Yonushonis, “Overview of thermal barrier coatings in diesel engines”, J. Therm. Spray Technol. [6(1)] (1997) 50-56

[28]           M.B. Beardsley, “Thick thermal barrier coatings for diesel engines”, J. Therm. Spray Technol. 6 (1997) 181-186

[29]           E. Büyükkaya, T. Engin, M. Cerit, “Effects of thermal barrier coating on gas emissions and performance of a LHR engine with different injection timings and valve adjustments”. Ener. Conv. Manag. 47 (2006) 1298-1310

[30]           I. Taymaz, “The effect of thermal barrier coating on diesel engine performance”. Surf. Coat. Technol. 201 (2007) 5249-5252

[31]           I. Taymaz, “An experimental study of energy balance in low heat rejection diesel engine”. Ener. 31 (2006) 364-371

[32]           M.B. Beardsley and H.J. Larson, “Thick thermal barrier coatings for diesel compounds” DOE/NASA/ 0332-1 NASA CR-190759, (1992)

[33]           A. Agüero, “Recubrimientos contra la corrosión a alta temperatura para componentes de turbinas de gas”, Rev. Metal. [43(5)] (2007) 384-398

[34]           R.H. Turner, Y.A. Cengel, “Fundamentals of thermal-fluid science”, McGraw-Hill Professional, 2004

[35]           P. Poza, P.S. Grant, “Microstructure evolution of vacuum plasma sprayed CoNiCrAlY coatings after heat treatment and isothermal oxidation”, Surf. Coat. Technol. 201 (2006) 2887-2896

[36]           T.E. Strangman, “Thermal barrier coatings for turbine airfoils”, Thin Solid Films [127 (1-2)] (1985) 93 -105

[37]           B.A. Movchan, “EB-PVD technology in the gas turbine industry: present and future”, JOM, [48(11)] (1996) 40-45

[38]           DeMasi-Marci, “Protective coatings in the gas turbine engine”, Surf. Coat. Technol. 68-69 (1994) 1-9

[39]           J.A. Thornton, “Influence of apparatus geometry and deposition conditions on structure and topography of thick sputtered coatings”, J. Vac. Sci. Technol. 11 (1974) 666-670

[40]           J.R. Nicholls, M.J. Deakin, D.S. Rickerby, “A comparison between the erosion behaviour of thermal spray and electron beam physical vapour deposition thermal barrier coatings”, Wear 233-235 (1999) 352-361

[41]           M.Y. He, A.G. Evans, J.W. Hutchinson, “The ratchening of compressed thermally grown thin films on ductile substrates”, Acta Mater. 48 (2000) 2593-2691

[42]           M.J. Stiger, N.M. Yanar, M.G. Topping, F.S. Pettit, G.H. Meier, “Thermal barrier coatings for the 21st century”, Z. Metalllk / Mater. Res. Adv. Technol. [90 (12)] (1990) 1069-1978

[43]           D.M. Lipkin, D.R. Clarke, “Measurements of the stress in oxide scales formed by oxidation of aluminium-containing alloys”, Oxid. Met. 45 (1996) 267-280

[44]           C. Mennicke, E. Schumann, C. Ulrich, M. Ruehle, “The effect of yttrium and sulphur on the oxidation of FeCrAl”, Mater. Sci. Forum 251-254 (1997) 389-396

[45]           V. Sergo, D.R. Clarke, “Observation of subcritical spall propagation of a thermal barrier coating”, J. Am. Ceram. Soc. 81 (1998) 3237-3247

[46]           V.k. Tolpygo, D.R. Clarke, “Wrinkling of alpha-alumina films grown by thermal oxidation: I. Quantitative studies on single crystal of Fe-Cr-Al alloy”, Acta Mater. 46 (1998) 5153-5166

[47]           R.J. Christense, V.K. Tolpygo, D.R. Clarke, “The influence of the reactive element Yttrium on the stress in alumina scales formed by oxidation”, Acta Mater. 45 (1997) 1761-1766

[48]           A.G. Evans, M.Y. He, J.W. Hutchinson, “Mechanisms controlling the durability of thermal barrier coatings”, Prog. Mater. Sci. 46 (2001) 505-553

[49]           F.N. Rhines, J.S. Wolf, “The role of oxide microstructure and growth stress in the high-temperature scaling of nickel”, Metall. Trans. 1 (1970) 1701-1710

[50]           D.B. Dove, D.H. Baldwin, “Oxidation induced bending of metal foils”, Metall. Trans. B [5(7)] (1974) 1637-1642

[51]           R.M. Cannon, W.H. Rhodes, A.H. Heuer, “Plastic deformation of fine-grained alumina”, J. Am. Ceram. Soc. 63 (1980) 46-53

[52]           J. Cho, M.P. Harmer, H.M. Chan, J.M. Rickman, A.M. Thomson, “Effect of yttrium and lanthanum on the tensile creep behaviour of aluminum oxide”, J. Am. Ceram. Soc. [80 (4)] (1997) 1013-1017

[53]           J. Fang, A.M. Thomson, M.P. Harmer, H.M. Chan, “Effect of yttrium and lanthanum on the sintering behaviour of ultra-high-purity Al2O3”, J. Am. Ceram. Soc. 80 (1997) 2005-2012

[54]           A.G. Evans, J.W. Hutchinson, M.Y. He, “Micromechanics model for the detachment of residually brittle films and coatings”, Acta Mater. 47 (1999) 1513-1522

[55]           C. H. Hsueh, E. R. Fuller, “Analytical modelling of oxide thickness effects on residual stress in thermal barrier coatings”, Scripta Mater. [42 (8)] (2000) 781-787

[56]           M.Y. Ali, S.Q. Nusier, G.M. Newaz, “Mechanism of damage initiation and growth in a TBC/superalloy system”, Int. J. Solids Struct. 38 (2001) 3329-3340

[57]           K.W. Schilichting, N.P. Padture, E.H. Jordan, M. Gell, “Failure modes in plasma sprayed thermal barrier coatings”, Mater. Sci. Eng. A 342 (2003) 120-130

[58]           A. Rabiei, A.G. Evans, “Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings”, Acta Mater. 48 (2000) 3963-3976

[59]           A.K. Nusair, J. Lu, H. Liao, “Effect of residual stresses on air plasma sprayed thermal barrier coatings”, Surf. Coat. Technol. 168 (2003) 291-299

[60]           G. Qian, T. Nakamura, C.C. Berndt, “Effects of thermal gradient and residual stresses on thermal barrier coating fracture”, Mech. Mater. 27 (1998) 91-110

[61]           S. Sridharan, L.G. Xie, H.E. Jordan, M. Gell, “Stress variation with thermal cycling in the thermally grown oxide of an EB-PVD thermal barrier coating”, Surf. Coat. Technol. 179 (2004) 286-296

[62]           S. Widjaja, A.M. Limarga, T.H. Yip, “Oxidation behaviour of a plasma-sprayed functionally graded ZrO2 / Al2O3 thermal barrier coating”, Mater. Lett. 57 (2002) 628-634

[63]           D.R. Mumm, A.G. Evans, “On the role of imperfections in the failure of a thermal barrier coating made by electron beam deposition”, Acta Mater. 48 (2000) 1815-1827

[64]           A.J. Burns, R. Subramanian, B.W. Kempshall, Y. H. Sohn, “Microstructure of as-coated thermal barrier coatings with varying lifetimes”, Surf. Coat. Technol. 177-178 (2004) 89-96

[65]           M.J. Pindera, J. Aboudi, S.M. Arnold, “Analysis of spallation mechanism in thermal barrier coatings with graded bond coats using the higher-order theory for FGMs”, Eng. Frac. Mech. (2002) 1587-1606

[66]           A. Peichl, T. Beck, O. Vohringer, “Behaviour if an EB-PVD thermal barrier coating under thermal-mechanical fatigue loading”, Surf. Coat. Technol. 162 (2003) 113-118

[67]           S.Q. Nusier, G.M. Newaz, “Growth of interfacial cracks in a TBC/superalloy system due to oxide volume induced internal pressure and thermal loading”, Int. J. Solids Struct. 37 (2000) 2151-2166

[68]           C. Mennicke, D.R. Mumm, D.R. Clarke. “Transient phase evolution during oxidation of a two-phase NiCoCrAlY bond coat”, Z. Metallk 90 (1999) 1079-1984

[69]           M.J. Grahan, J.I. Eldridge, D.F. Mitchell, R.J. Hussey, “Anion transport in growing Cr2O3 scales”, Mater. Sci. Forum 43 (1989) 207-242

[70]           J. Toscano, R. Vassen, A. Gil, M. Subanovic, D. Naumenko, L. Singheiser, W.J. Quadakkers, “Parameters affecting TGO growth and adherent on MCrAlY-bond coats for TBC’s”, Surf. Coat. Technol. 201 (2006) 3906 – 3910

[71]           P. Saltykov, O. Fabrichnaya, J Golczewski, F. Aldinger, “Thermodynamic modelling of oxidation of Al-Cr-Ni alloys”, J. Alloys & Compounds 381 (2004) 99-113

[72]           J.G. Smeggil, “Some comments on the role of yttrium in protective oxide scale adherence”, Mater. Sci. Eng. A 87 (1987) 261-265

[73]           J.L. Smialek, D.T. Jayne, J.C. Schaffer, W.H. Murphy, “Effects of hydrogen annealing, sulphur segregation and diffusion on the cyclic oxidation resistance of superalloys – A review”, Thin Solid Films 253 (1994) 285-292

[74]           H.M. Tawancy, “On the role of yttrium during high-temperature oxidation of an Ni-Cr-Al-Fe-Y alloy”, Metall. Trans. 22A (1991) 1463-1465

[75]           A.S. Khanna, “High Temperature Oxidation and Corrosion”, ASM international (2002). Cap. 8 “Oxidation in Mixed-Gas Environments”, 135-171

[76]           T. Xu, S. Faulhaber, C. Mercer, M. Maloney, A. Evans, “Observations and analyses of failure mechanisms in thermal barrier systems with two phase bond coats based on NiCoCrAlY”, Acta Mater. 52 (2004) 1439–1450

[77]           U. Schulz, C. Leyens,  K. Fritscher, M. Peters, B. Saruhan-Brings, O. Lavigne, J.M. Dorvaux, M. Poulain, R. Mévrel, M. Caliez “Some recent trends in research and technology of advanced thermal barrier coatings”, Aero. Sci. Technol. 7 (2003) 73–80

[78]           R. Heung, X. Wang, P. Xiao, “Characterisation of PSZ/Al2O3 composite coatings using electrochemical impedance Spectroscopy”, Electrochimica Acta 51 (2006) 1789–1796

[79]           Y.C. Zhou, T. Hashida, “Thermal fatigue failure induced by delamination in thermal barrier Coating”, Int. J. Fatigue 24 (2002) 407–417

[80]           D. Stöver, C. Funke, “Directions of the developments of thermal barrier coatings in energy applications”, J. Mater. Process. Technol. 92–93 (1999) 195-202

[81]           T. Hejwowski, A. Weronski, “The effect of thermal barrier coatings on diesel engine performance”, Vacuum 65 (2002) 427-432

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s

A %d blogueros les gusta esto: